Aquatec pressure sewer systems are one of the most economical and environmentally friendly sewerage systems available.

Our customised design approach meets changing demands for domestic, commercial and industrial applications.

Suitable for both replacing onsite septic systems areas and greenfield developments, our pressure sewer systems operate across any terrain.

As the number one provider of customised end-to-end pressure sewer systems, Aquatec takes a holistic approach to delivering long-term solutions.

Our pressure sewer systems are customised to deliver up-front and long-term operational cost savings.

By taking a tailored approach to the design of pressure sewer systems, we ensure that all practical requirements and site conditions are met. The result is a carefully considered, economical and reliable solution.

Aquatec’s OmniSmart controller is a fully automated, preprogramed device that accurately controls flows within your reticulation network. By prioritising pump operation, it optimises your pressure sewer network, and is fully upgradable to allow remote access

Our pressure sewer chambers are engineered with a domed base, designed to direct solids into the grinder of the pump. This eliminates the potential for solids build up in dead zones and associated odour issues.

With an international protection rating of IP68, Aquatec’s pumps hold the highest level of submergance protection against water ingress.

Our reticulation valve kits are manufactured and tested to the highest standards using 316 stainless steel components and tested to a 16-bar operating pressure.

1234

Aquatec pressure sewer systems have been installed in thousands of residential, commercial and industrial sewerage networks across Australasia.

As the number one provider of customised end-to-end pressure sewer systems, we are proud to be at the forefront of this wastewater revolution.

Enviroplex

Enviroplex

A single pump system designed for adverse ground conditions and rocky terrains.

Select
Enduraplex

Enduraplex

An injection moulded, single pump system designed for any application.

Select
Duplex

Duplex

A dual pump system for multiple residential, industrial and commercial applications.

Select
Triplex

Triplex

A triple pump system for large-scale industrial and commercial applications.

Select

Enviroplex – Simplex

Enviroplex features a unique shallow tank with reduced diameter base for adaptability across adverse ground conditions and rocky terrains.

Litres (nominal)950
Diameter1.1m
Depth1.65m
Depth to Inlet (max)1.0m
Enviroplex Pressure Sewer

Enduraplex – Simplex

The Enduraplex is a world-class, injection moulded, single-pump system designed to endure the most of rigorous conditions, while providing the most economical solution.

Litres (nominal)900
Diameter1.2m
Depth1.45m
Depth to Inlet (max)0.9m
Enduraplex - Pressure Sewer

Duplex Specifications

Duplex is a dual-pump system for multiple residential, industrial or commercial applications. It is available as polyethylene or fibreglass construction, depending on the daily volume requirements.

Litres (nominal)1100
Diameter1.0m
Depth1.6m
Depth to Inlet (max)1.1m
Litres (nominal)1500
Diameter1.0m
Depth2.2m
Depth to Inlet (max)1.7m
Litres (nominal)3000
Diameter1.5m
Depth2.2m
Depth to Inlet (max)1.7m
Litres (nominal)5000
Diameter1.5m
Depth3.0m
Depth to Inlet (max)2.4m
Litres (nominal)7500
Diameter1.85m
Depth3.0m
Depth to Inlet (max)2.4m
Litres (nominal)10000
Diameter2.2
Depth3.0
Depth to Inlet (max)2.4
Litres (nominal)15000
Diameter2.5m
Depth3.5m
Depth to Inlet (max)2.9m
Duplex - Pressure Sewer

Triplex Specifications

Triplex systems are constructed from fibreglass and are engineered for multiple commercial and industrial applications where larger tanks are required to handle higher daily flows.

Litres (nominal)3000
Diameter1.5m
Depth2.2m
Depth to Inlet (max)1.7m
Litres (nominal)5000
Diameter1.5m
Depth3.0m
Depth to Inlet (max)2.4m
Litres (nominal)7500
Diameter1.85m
Depth3.0m
Depth to Inlet (max)2.4m
Litres (nominal)10000
Diameter2.2m
Depth3.0m
Depth to Inlet (max)2.4m
Litres (nominal)15000
Diameter2.5m
Depth3.5m
Depth to Inlet (max)2.9m
Triplex - Pressure Sewer

Designed for multiple uses
Works across single residential dwellings and light commercial applications.
Moulded inlet stubs allow for easy on-site connections.

Single piece mould-formed construction
Engineered with a unique domed base, the chamber empties each cycle to deliver a seamless, odour free operation.

IP68 rated pumps and
level controls

The pump & level control are fully submersible, function continuously with zero maintenance & offer the highest levels of protection

16 bar rated
flexible pipework

Handles up to 160 metres of pressure. Added safety protection against burst pipes and leaks.

Industrial-grade
low-profile covers

A child-safe locking mechanism prevents unwanted pit access.

Designed for multiple uses
Works across single residential dwellings and light commercial applications.
Moulded inlet stubs allow for easy on-site connections.

Single piece mould-formed construction
Engineered with a unique domed base, the chamber empties each cycle to deliver a seamless, odour free operation.

IP68 rated pumps and
level controls

The pump & level control are fully submersible, function continuously with zero maintenance & offer the highest levels of protection

16 bar rated
flexible pipework

Handles up to 160 metres of pressure. Added safety protection against burst pipes and leaks.

Industrial-grade
low-profile covers

A child-safe locking mechanism prevents unwanted pit access.

00 End-to-end Pressure Sewer Process

By taking a holistic approach to our water and wastewater solutions, we guarantee a perfect end-to-end solution with no hidden costs.

01 Feasibility Design

02 Hydraulic Analysis

03 Homeowner Consultations

04 Manufacture, Supply & Delivery

05 Training & Auditing

06 Life Cycle Management

System Benefits


Related Products

 

Water & Wastewater Reuse

Our water and wastewater reuse systems reduce demand on potable water supplies for municipal, industrial and private projects.

View More

Storage Vessels

Custom designed for your project’s specifications, our fibreglass storage vessels are structurally engineered to handle critical inflows.

View More

Pump Stations

Aquatec concrete pump stations are structurally engineered to deliver on individual project specifications, operational requirements and site conditions.

View More

Get in Touch

If you have a specific project in mind or would like to know more about us, we’re always ready to talk. Let’s get started with a few questions.

1300 088 555

Headquarters

2 Provincial Crescent,
Shepparton, VIC 3630

Melbourne CBD

Level 5 (Morgan Group)
356 Collins Street,
Melbourne, VIC 3000

Sydney

Lvl 1, Suite F, Octagon Building
110 George Street
Parramatta NSW 2150

Brisbane

47 Moreton Street,
Heathwood, QLD 4110

Adelaide

844 South Road,
Edwardstown, SA 5039